Very simple! Did it in 10 minutes.....

"Ingredients" -

- 4 90 degrees elbows

- 2 tees

- PVC pipes from Homedepot (all of the above in 1 inch diamter)

- Piece of pond netting

- Package of Easy-Ties

Measure the length and height of the area you wonna put the divider in, and cut the pipes to size. You should have 2 small sides for the height of the divider, the rest of it is for the length. Stack the pieces together....It should look like this....

Lay the piece of pond netting flat on the floor, cut it a little bit bigger than the size of the divider, put the divider on top of the net, and tighten the net onto the divider with the easy-ties. Cut the pieces off of the easy-ties that are too long, so the fish can't hurt themselves on them.

The finished product.....

.....in the pond!

Done!! Ranchu babies on one side, 3 wakin on the other. Since the wakin are in breeding mood, there is no hurting the way smaller ranchu, and no odd fish fry either!

## Recommended Comments

## Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.